Faucets on utility sinks seem to get damaged way too often despite being used gently. One hence needs to frequently upgrade to better ones that are of superior quality. However, this brings on the question, can I attach a different faucet to a utility sink?
The answer is yes, as long as the size of your basin’s hole matches that of the faucet’s thickness. Hundreds of options will be available, and you can click here to access some of our favorite utility sink faucets. Now, without further ado, let us teach you how to do this extremely simple task!
Table of Contents
- 1 Step-by-Step Guide to Installing a New Utility Sink Faucet
- 1.1 Step One: Turning off the Water Supply
- 1.2 Step Two: Removing the Faucet from the Utility Sink
- 1.3 Step Three: Cleaning your Utility Sink
- 1.4 Step Three: Installing the New Faucet on your Utility Sink
- 1.5 Step Four: Getting your New Faucet Ready
- 1.6 Step Five: Reconnecting the Water Supply
- 1.7 Step Six: Testing the New Faucet
- 2 Frequently Asked Question
- 3 Conclusion
Step-by-Step Guide to Installing a New Utility Sink Faucet
Things you will need
- Basin wrench
- Flathead screwdriver
- Other screwdrivers that are capable of unscrewing your faucet
- A new faucet
- Plumber’s Putty
- Putty Knife
Step One: Turning off the Water Supply
Disconnecting your utility sink from its water supply is the first step to starting your plumbing task. If your faucet has shut-off valves, you can pull down the handles present underneath the utility sink to get this done. One will be for the hot water supply while the other will be for the cold water supply.
Your sink might also have a knob present below it which can be rotated to cut down the water supply. Do what you need to do to prevent the water from violently spurting onto your face!
Step Two: Removing the Faucet from the Utility Sink
A flat-headed screwdriver can be utilized to remove the handle off of your utility sink faucet. Once you have done this, you will be able to see other screws which can be used to loosen the faucet’s grip to the sink. Remove the valve stem and bring out the valve seal to get rid of the O-rings and washer. Your old utility sink faucet is now removed.
Step Three: Cleaning your Utility Sink
Using mild dishwashing soap or other cleaning agents along with water, scrub the sink’s hole clean. Brushes or sponges can be used to get a thorough job done.
Step Three: Installing the New Faucet on your Utility Sink
Some faucets come with a rubber gasket for installation, while others don’t. Those without a rubber gasket thus require a plumber’s putty for attaching to the sink. Using your hands, surround the mouth of your sink’s hole with an excess amount of plumber’s putty. Then, insert your tap through the hole so that it rests against the putty. The extra amount will be coming out and you can use your putty knife to scrape it off before it hardens.
Step Four: Getting your New Faucet Ready
Put the mounting nuts and screws in their designated position and, using screwdrivers and basin wrench wherever necessary, fixate the faucet into position. Make sure you have inserted all of its parts and, while tightening, be careful not to change the faucet’s alignment. You should not apply too much force either to prevent yourself from scratching or causing cracks on the faucet’s body.
Step Five: Reconnecting the Water Supply
With your new sink assembled onto the position, work on getting your water supply back. If you had disconnected the main water supply, turn that back on. Those who had gone with the shut-off valved method should pull the handles for hot and cold water valves in the opposite direction. Your sink will now receive a steady flow of water.
Step Six: Testing the New Faucet
Turn on your faucet to see if water runs out of it. As you have connected the new utility sink faucet with its water supply, you should be able to use the tap to the fullest of its ability. If it is not working, it is very likely that you made a mistake in the installation process. So, go through the article once again or contact a plumber for assistance.
Frequently Asked Question
Are single handle faucets worth it?
Of course, single handle faucets are way more user-friendly than double-handle faucets. People with arthritis and other joint problems find them a lot easier to use. The installation process is also simple so you can have it attached without a plumber’s assistance.
Are all faucets interchangeable?
No, not all faucets can be fixed on every sink. Some will have to require bigger sink holes while others need to be fixated onto walls to function as intended.
What is a ball faucet?
These are a type of faucets that do not have washers installed within their body. Instead, they have a metal ball present along with O-rings and rubber seals that allow the faucet to operate. Ball faucets have a single handle that can be lifted to get a water supply.
Can a touchless faucet work manually?
Yes, one can operate a touchless faucet using its handle. They are pretty much like normal faucets except that the sensors act as an added feature.
Can I replace center set faucet with widespread faucets?
Yes, you can do so. However, the options will be limited as most widespread faucets do not fit into the 4 inch center holes that center set faucets have.
Can I attach a different faucet to a utility sink?
Yes, you can. A guide has been presented to help you get through the installation process without any hassle. Do not skip any of the steps mentioned to be presented with an upgraded faucet that functions flawlessly. Hopefully, we have managed to successfully assist you with your tasks!